1,308
edits
Dolby A: Difference between revisions
no edit summary
No edit summary |
|||
| Line 7: | Line 7: | ||
Dolby A noise reduction is a process in which the dynamic range of a recording is compressed, and then expanded upon playback via a Dolby sound processor. In basic terms, during noise reduction a compressor boosts the quiet parts and reduces the loud parts while an expander makes the loud parts louder and quiet parts quieter. [[Dolby SR]] (spectral recording) applies a different compression and expansion characteristic to each frequency band. Dolby A applies the same one to all the bands. This is part of why it sounds bad when you playback an A-type track with Dolby SR noise reduction. You (or rather the Dolby processor) is applying the incorrect expansion characteristic. The expander does not match the compressor! | Dolby A noise reduction is a process in which the dynamic range of a recording is compressed, and then expanded upon playback via a Dolby sound processor. In basic terms, during noise reduction a compressor boosts the quiet parts and reduces the loud parts while an expander makes the loud parts louder and quiet parts quieter. [[Dolby SR]] (spectral recording) applies a different compression and expansion characteristic to each frequency band. Dolby A applies the same one to all the bands. This is part of why it sounds bad when you playback an A-type track with Dolby SR noise reduction. You (or rather the Dolby processor) is applying the incorrect expansion characteristic. The expander does not match the compressor! | ||
===Visual Identification=== | ===Visual and Contextual Identification=== | ||
Dolby A is difficult to distinguish from [[Dolby SR]] by sight. Like with [[aspect ratios]] it is best to use multiple sources in order to help inform your decision, including things like the production year of the print, any labels identifying format on the print itself, on the leader, or in the credits. Country of origin, whether the film was a hollywood production or low-budget independent film. Here are some tips on telling them apart: | Dolby A is difficult to distinguish from [[Dolby SR]] by sight. Like with [[aspect ratios]] it is best to use multiple sources in order to help inform your decision, including things like the production year of the print, any labels identifying format on the print itself, on the leader, or in the credits. Country of origin, whether the film was a hollywood production or low-budget independent film. Here are some tips on telling them apart: | ||
* First, make sure it's not a [[mono]] print with two [[variable area]] tracks. This is very common. It's safe to say that any film made before 1975 will be a mono print. There are some cases where mono films were re-released later on with remastered Dolby tracks, but these usually are fairly well labeled and easy to identify. There are many films released in mono post-1975, especially foreign titles or films made with smaller budgets. Look at the two tracks closely, with mono prints they will be identical. With Dolby A or SR prints the tracks will be the same in some spots and differ in others. Check areas that have music in them, the credits at the end of the film are often a good spot. | * First, make sure it's not a [[mono]] print with two [[variable area]] tracks. This is very common. It's safe to say that any film made before 1975 will be a mono print. There are some cases where mono films were re-released later on with remastered Dolby tracks, but these usually are fairly well labeled and easy to identify. There are many films released in mono post-1975, especially foreign titles or films made with smaller budgets. Look at the two tracks closely, with mono prints they will be identical. With Dolby A or SR prints the tracks will be the same in some spots and differ in others. Check areas that have music in them, the credits at the end of the film are often a good spot. | ||
* Many studio films made between 1975 and 1985 will have Dolby A tracks. If the tracks look different at any point, you can rule out mono. | * Many studio films made between 1975 and 1985 will have Dolby A tracks. If the tracks look different at any point, you can rule out mono. | ||
* Some (but not all) films made after 1986 will have Dolby SR tracks, though A-type was still in use well into the 90s. | |||
* Some (but not all) films with Dolby A tracks will display the word "Dolby" - or "Dolby Stereo" rather than "Dolby SR" - with the Dolby logo in the end credits. But be careful, just because you see one of these in the credits of the film does not guarantee that it is A Type or SR. Some films were released as both mono and stereo prints, or a film may have been re-mastered and released as SR but was originally mono. Seeing the logo in the credits is just another clue to be used with alongside other sources of information. | * Some (but not all) films with Dolby A tracks will display the word "Dolby" - or "Dolby Stereo" rather than "Dolby SR" - with the Dolby logo in the end credits. But be careful, just because you see one of these in the credits of the film does not guarantee that it is A Type or SR. Some films were released as both mono and stereo prints, or a film may have been re-mastered and released as SR but was originally mono. Seeing the logo in the credits is just another clue to be used with alongside other sources of information. | ||
* Some (but not all) films with Dolby A tracks will display the words "Stereo" on the edges of the film [[leader]]. | * Some (but not all) films with Dolby A tracks will display the words "Stereo" on the edges of the film [[leader]]. | ||
===Auditory Identification=== | ===Auditory Identification=== | ||