1,308
edits
Film base: Difference between revisions
no edit summary
No edit summary |
|||
| Line 4: | Line 4: | ||
With rare exceptions, all 35mm release prints made since the late 1990s have been printed on '''polyester''' base. Many 16mm prints from the mid 80s onward are also printed on polyester stock. Nothing pre-1955 will be on polyester base. Unlike acetate or nitrate stock, polyester is essentially unbreakable and cannot be torn by human hands. It is also not susceptible to vinegar syndrome and does not warp or shrink (though it is not uncommon for the film to have a slight "bow"). It is believed that a film printed on polyester stock will last several hundred years because the base does not deteriorate [cite]. Polyester base is easy to identify because it is slightly thinner than acetate or nitrate, which also means adjustments in focus must be made if acetate and polyester films are spliced together in a single reel (such as a trailer reel). Polyester film cannot be cement spliced - it must be tape spliced or ultrasonic spliced. | With rare exceptions, all 35mm release prints made since the late 1990s have been printed on '''polyester''' base. Many 16mm prints from the mid 80s onward are also printed on polyester stock. Nothing pre-1955 will be on polyester base. Unlike acetate or nitrate stock, polyester is essentially unbreakable and cannot be torn by human hands. It is also not susceptible to vinegar syndrome and does not warp or shrink (though it is not uncommon for the film to have a slight "bow"). It is believed that a film printed on polyester stock will last several hundred years because the base does not deteriorate [cite]. Polyester base is easy to identify because it is slightly thinner than acetate or nitrate, which also means adjustments in focus must be made if acetate and polyester films are spliced together in a single reel (such as a trailer reel). Polyester film cannot be cement spliced - it must be tape spliced or ultrasonic spliced. | ||
* Polyester stock is often referred to as "Estar base" which is the Kodak trade name for their polyester stock. | * Polyester stock is often referred to as "Estar base" which is the Kodak trade name for their polyester stock. | ||
===Acetate base=== | ===Acetate base=== | ||
| Line 13: | Line 11: | ||
===Nitrate=== | ===Nitrate=== | ||
'''Nitrate''' base is the infamously unstable and flammable stock that most release prints were made of until the early 1950s. Discontinued in 1951 and replaced with acetate "safety film". Look for the word "nitrate" written on the side of the film, though make sure it's not printed in from the original negative, as many nitrate prints were later re-struck on acetate or polyester stock. It's considered a hazardous material and becomes more dangerous as it deteriorates. Make sure you know the proper storage specifications for nitrate if you have any! | '''Nitrate''' base is the infamously unstable and flammable stock that most release prints were made of until the early 1950s. Discontinued in 1951 and replaced with acetate "safety film". Look for the word "nitrate" written on the side of the film, though make sure it's not printed in from the original negative, as many nitrate prints were later re-struck on acetate or polyester stock. It's considered a hazardous material and becomes more dangerous as it deteriorates. Make sure you know the proper storage specifications for nitrate if you have any! | ||
==How to tell the difference== | |||
* [https://www.nps.gov/museum/coldstorage/pdf/2.3.1b.pdf A guide] for making a film viewer for easy identification of acetate or polyester film base. Older polarized 3D glasses (they use spherical polarization) work great for this if you can find some. Real-D glasses do NOT work. Polyester base will create a sort of "rainbow" effect when viewed between the cross polarized lenses, acetate base will not. | |||
*You can also differentiate between the two by holding up the reel of film to a strong light. With polyester base prints the light will shine through, with acetate it will appear opaque. I find this is true most of the time, though the polarized lens test is more definitive. | |||
*Polyester is very difficult to tear with your hands, it stretches rather than snaps. However this test is not recommended as it requires you to damage the film. However an accidental film break or a test that can be done with the [[leader]] may give you an answer. Just make sure the leader is original to the print, as sometimes a leader or countdown may be spliced a print of a different base. | |||
==Resources== | ==Resources== | ||