470
edits
Aperture plates: Difference between revisions
Added dash to "Simplex X-L"
No edit summary |
JesseCrooks (talk | contribs) (Added dash to "Simplex X-L") |
||
| Line 11: | Line 11: | ||
'''Cutting Aperture Plates:''' Aperture plates are typically cut using flat files that are blank on two sides. Ideally the technician or projectionist will begin with a plate that is "pre-cut" for their aspect ratio, but in some cases will have to use what is available, for example cutting a 1.66 plate out of a 1.85 plate. '''IMPORTANT:''' Projectors must be cleaned thoroughly after plates are cut. Stray bits metal can work their way into the film path and scratch the film. | '''Cutting Aperture Plates:''' Aperture plates are typically cut using flat files that are blank on two sides. Ideally the technician or projectionist will begin with a plate that is "pre-cut" for their aspect ratio, but in some cases will have to use what is available, for example cutting a 1.66 plate out of a 1.85 plate. '''IMPORTANT:''' Projectors must be cleaned thoroughly after plates are cut. Stray bits metal can work their way into the film path and scratch the film. | ||
[[File:Apertureplates.JPG|thumb|300px|Aperture plates from a [[Kinoton]] 35mm projector (top), a [[Century C]] 35mm projector, and a [[Simplex | [[File:Apertureplates.JPG|thumb|300px|Aperture plates from a [[Kinoton]] 35mm projector (top), a [[Century C]] 35mm projector, and a [[Simplex X-L]] 35mm projector]]. | ||
[[File:Apertureplate-norelco.jpg|thumb|300px|Aperture plate from a [[Norelco AAII]]]] | [[File:Apertureplate-norelco.jpg|thumb|300px|Aperture plate from a [[Norelco AAII]]]] | ||