| Welcome to Sprocket School! This project is maintained by volunteer editors. Learn more about how this works. |
Shutters: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
A shutter is a rotating device with a single blade or multiple blades used to interrupt the light source as film is pulled through the gate. The shutter "blanks" the light from the [[lamphouse]] as the [[intermittent]] pull down motion happens. Shutters also prevent the heat of the lamp from hitting the film plane continuously. | A shutter is a rotating device with a single blade or multiple blades used to interrupt the light source as film is pulled through the gate. The shutter "blanks" the light from the [[lamphouse]] as the [[intermittent]] pull down motion happens. Shutters also prevent the heat of the lamp from hitting the film plane continuously. | ||
*If the shutter isn't timed properly you will see a travel ghost or [[ghosting]] on screen. This happens because the shutter isn't completely blanking | *If the shutter isn't timed properly you will see a travel ghost or [[ghosting]] on screen. This happens because the shutter isn't completely blanking the light onto the film plane as the pull down motion of the intermittent occurs. | ||
===Types of Shutters=== | ===Types of Shutters=== | ||
The type of shutter used depends on the type of projector, the pull down speed of intermittent mechanism, the desired light efficiency, among other variables. | The type of shutter used depends on the type of projector, the application, the pull down speed of the intermittent mechanism, the desired light efficiency, among other variables. Examples of projectors that may use these types of shutters are listed in parentheses. | ||
* single blade ([[Kinoton]], [[Ernemann]]) | * single blade ([[Kinoton]], [[Ernemann]], [[Eastman 25]]) | ||
* dual blade ([[Simplex XL]]) | * dual blade ([[Simplex XL]]) | ||
* dual blade counter rotating | * dual blade counter-rotating dual shutter ([[Century JJ]], [[Brenkert]]) | ||
* 3 blade (often used with variable speed motors) | * 3 blade (often used with variable speed motors) | ||
* 3 blade counter-rotating dual shutter | * 3 blade counter-rotating dual shutter ([[Century]] projectors, variable speed) | ||
* 5 blade single (pretty rare, used for studio machines | * 5 blade single (pretty rare, used for studio machines used [https://en.wikipedia.org/wiki/Telecine telecine]. | ||
[[Category:Projector components]] | [[Category:Projector components]] | ||
[[Category:Equipment]] | [[Category:Equipment]] | ||
Revision as of 18:42, 30 March 2017
A shutter is a rotating device with a single blade or multiple blades used to interrupt the light source as film is pulled through the gate. The shutter "blanks" the light from the lamphouse as the intermittent pull down motion happens. Shutters also prevent the heat of the lamp from hitting the film plane continuously.
- If the shutter isn't timed properly you will see a travel ghost or ghosting on screen. This happens because the shutter isn't completely blanking the light onto the film plane as the pull down motion of the intermittent occurs.
Types of Shutters
The type of shutter used depends on the type of projector, the application, the pull down speed of the intermittent mechanism, the desired light efficiency, among other variables. Examples of projectors that may use these types of shutters are listed in parentheses.
- single blade (Kinoton, Ernemann, Eastman 25)
- dual blade (Simplex XL)
- dual blade counter-rotating dual shutter (Century JJ, Brenkert)
- 3 blade (often used with variable speed motors)
- 3 blade counter-rotating dual shutter (Century projectors, variable speed)
- 5 blade single (pretty rare, used for studio machines used telecine.