1,318
edits
| Welcome to Sprocket School! This project is maintained by volunteer editors. Learn more about how this works. |
Best practices: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
|||
| Line 15: | Line 15: | ||
* Have an [[inspection form]] to facilitate communication about print condition. | * Have an [[inspection form]] to facilitate communication about print condition. | ||
* [[Cleaning]] the projectors and checking all parts (including [[reels]]) for damage and wear routinely is a must. | * [[Cleaning]] the projectors and checking all parts (including [[reels]]) for damage and wear routinely is a must. | ||
* Run [[test film]] to check frame and focus before the show, or run a test reel of the film (if possible). | * Make sure your [[Xenon short-arc lamp|lamp]] is correctly aligned and you are not seeing hot spots or shadows on screen | ||
* Run [[test film]] to check frame and focus before the show, or run a test reel of the film (if possible). | |||
* Make sure tension is set correctly for the gauge and film stock you will be running | |||
* Make sure your [[Xenon short-arc lamp|lamp]] is correctly aligned and you are not seeing hot spots or shadows on screen | |||
'''During projection''': | '''During projection''': | ||
| Line 23: | Line 26: | ||
* Show the film in its proper [[aspect ratio]] using the appropriate [[lens]] and [[aperture plate]]. | * Show the film in its proper [[aspect ratio]] using the appropriate [[lens]] and [[aperture plate]]. | ||
* Make sure a projectionist is present and attentive during the screening. | * Make sure a projectionist is present and attentive during the screening. | ||
* Check focus routinely. During [[changeover]] shows focus should be checked after every changeover. | * Check focus routinely. During [[changeover]] shows focus should be checked after every changeover. | ||
* Check volume from the auditorium (if possible) | |||
'''After the show''': | '''After the show''': | ||
* If possible, do a post-screening inspection of the print to make sure no damage was incurred during projection. | |||
* Wind the film with care, making sure the edges of the film are flush. | * Wind the film with care, making sure the edges of the film are flush. | ||
* Secure the end of each reel with at least 6" of acid-free artist's tape. | * Secure the end of each reel with at least 6" of acid-free artist's tape. | ||