470
edits
| Welcome to Sprocket School! This project is maintained by volunteer editors. Learn more about how this works. |
Rewind bench: Difference between revisions
Jump to navigation
Jump to search
m
→Best Practices
JesseCrooks (talk | contribs) m (→Motorized) |
JesseCrooks (talk | contribs) m (→Best Practices) |
||
| Line 48: | Line 48: | ||
==Best Practices== | ==Best Practices== | ||
No matter what type of rewind equipment you are using, it is essential that even speed and tension be maintained on the take up and feed reels at all | No matter what type of rewind equipment you are using, it is essential that even speed and tension be maintained on the take up and feed reels at all times. Always be checking your reels and spindles to make sure they are true and not bent or warped. If you're using a Kelmar table check to make sure the pads aren't worn down. The rewind table is one of the main places that prints are damaged! Never leave winding film unattended. | ||
* Be very careful when winding film that is loosely wound onto another reel, if too much tension is put on the film it will become cinched. THIS DAMAGE IS IRREVERSIBLE as dirt is embedded into the emulsion. | * Be very careful when winding film that is loosely wound onto another reel, if too much tension is put on the film it will become cinched. THIS DAMAGE IS IRREVERSIBLE as dirt is embedded into the emulsion. | ||
* Keep it Clean: your rewind table is not your desk. We know booths can be very small, but keep your rewind table tidy and free of dust, and give yourself room to work. | * Keep it Clean: your rewind table is not your desk. We know booths can be very small, but keep your rewind table tidy and free of dust, and give yourself room to work. | ||