Kinoton FP 38 E: Difference between revisions

The '''Kinoton FP 38 E''' is a [[:Category:Dual gauge projectors|dual guage projector]] capable of projecting both [[35mm]] and [[16mm]] film.

* film break sensors + workarounds

* FSC handbook on gate tension - to revise: Be careful when you are adjusting the focus that you don’t actually adjust the film pressure skate knob.  It’s a knob on the front of the Kinoton that adjusts the amount of pressure that the film pressure skate has.  Too much pressure and you can damage the film – too little and the film will shake in the gate making the picture shake on screen.  There is a scale under the film pressure skate, which should be set in the center.  The only time you should ever need to adjust the amount of pressure would be if you were projecting a shrunken or thinner than normal film that is shaking in the gate.

* '''[http://filmstudiescenter.uchicago.edu/ University of Chicago Film Studies Center]''', Chicago, IL - dual FP 38 Es at Cobb Hall location.

* '''[http://www.blockmuseum.northwestern.edu/view/cinema/ Block Cinema at Northwestern University]''', Evanston, IL - dual FP 38 Es

[[Category:Projectors]]